Iron & Manganese Removal Water Filters industrial commercial residential KINETICO World’s #1

This entry was posted in Uncategorized on by .


KINETICO PROFILE come back by clicking on Kinetico Presentation on top of the page

THE LIFETIME OF KINETICO SYSTEMS IS UP TO 30 YHEARS, THEY NEVER BREAK DOWN

 
How the Kentico system works
Air is introduced into the water stream, promoting oxidation. Oxidation converts soluble iron and manganese to insoluble compounds, which precipitate out and collect in the bottom of the tank and is removed by backwashing – all other brand use chlorine
Kinetico iron and manganese removal water filters are the best in the world, nothing comes close to them. They have no equal.

WHY KINETICO IS THE BEST VIDEO
Iron and Manganese are the most common metals we deal with as contaminants in the water treatment industry. Their presence can generate objectionable tastes, odors, staining, and coloring of anything they come into contact with. The methods for treating and removing them from water supplies have been around for hundreds of years. The process for removing them can be both easy and difficult, depending on their concentration individually or together. Public water supplies don’t typically deal with these constituents because they source their water from surface sources. Private water wells in the Mid-Atlantic and Northeast United States can almost guarantee they’ll have one, if not both iron and manganese present at some level. Iron is the 4th most abundant element in the earth’s crust and comprises around 5% of it, while manganese is around 0.1%. Iron and manganese bearing bedrock formations are dissolved into groundwater typically from the presence of free CO2. Iron concentrations in groundwater typically range from 0-10.0 mg/L, but 20 mg/L or higher are not uncommon. Manganese is much less common, and typically ranges from 0-2.0 mg/L.
Signs of Iron and Manganese in your water

  • Clouding and sediment: If your water supply contains iron, your water may have a cloudy appearance and contain sediment. The reason is that the oxidised iron will no longer dissolve completely in the water and precipitates out.
  • Discolouration: If you have high iron levels in your water — usually 0.3 ppm or more or more — the water may be a rusty red or brown colour. Your water may still be safe to drink, but it will look less appealing.
  • Staining: High concentrations of iron and Manganese in home water will stain porcelain bathroom fixtures, laundry and dishes. Iron leaves unsightly reddish-brown MANGANESE leaves black stains that are difficult to remove.
  • Metallic taste and smell: High iron concentrations often impart a metallic taste and smell to the water source.
  • Altered appearance of food: Tea, coffee and vegetables prepared with iron-rich water may turn dark black and look unappetising. They may also have a harsh, metallic taste.
  • Pipe build-up: Over time, iron sediment and residue can build up in the reticulation system and result in costly repairs.
  • Bacterial overgrowth: Rarely, bacteria known as iron bacteria combine with iron to form rust and bacterial slime. They do not typically cause disease. However, research has shown that the presence of iron in water can promote the growth of bacteria like E. coli. Particularly if you have well water, you’ll want to test your water regularly to make sure it has not become contaminated with harmful bacteria.

    • WHAT MAKES KINETICO THE WORLD’S BEST? HERE IS WHY

    Powered by Better Thinking
    From furthering best practices to developing bold, new ways of thinking, Kinetico engineers have historically developed water systems that outperform existing technologies and set new standards for the industry. In 1970, Kinetico patented the only water system powered not by electricity but by the kinetic force of moving water; today, we boast a complete portfolio of products that meet every need of the residential, commercial and industrial markets. Whatever your application and whatever your industry, Kinetico water systems exist to keep you ahead of the curve.
    Unmatched Performance
    For more than 40 years, Kinetico has taken a smarter approach to solving water problems. Our systems treat water more efficiently, effectively and economically. With more contaminant removal and no spikes in performance, you can be confident they will outperform other options available and provide clean, clear water for years and years. It’s why so many people and businesses around the world rely on our products

    Non-Electric
    Water and electricity don’t mix, so Kinetico found a better way. Kinetico systems are powered by the force of moving water, not electricity. Our patented approach to water treatment eliminates the hassles of timers and computers—there’s nothing to plug in, and there are no electrical components to set, adjust, repair or replace. Our systems also monitor water use and only process your water when needed, eliminating waste.

    Dependable
    Kinetico systems are built to last. Many customers became tired of all the problems with their previous water systems and replaced them with a Kinetico system. They now enjoy the system’s reliability and the fact that it provides them with treated water whenever they need it.

    Tailored solutions
    By partnering with you to develop a solution tailored to your exact specifications, Kinetico water systems help you meet environmental regulations, exceed performance expectations and satisfy demand. Investing in a Kinetico water system for your business or home provides you with not only the best technology and products available but extraordinary service as well. Whether upgrading an old system or expanding an existing one, Kinetico will bring a wealth of knowledge that can help streamline the process and ensure all your water needs are squarely met.

    THE LIFTIME OF A KINETICO SYSTEM IS UP TO 30 YEARS, THEY NEVER BREAK DOWN

    EVERY KINETICO IRON FILTER REMOVES A WIDE RANGE OF IRON

    Iron Removal Uncompromised
    If you want better quality water, but not at the expense of the environment, then Kinetico has the answer. Our solutions use less salt and water, work better and last longer, which keeps them out of landfills. In fact, we have customers who have had their Kinetico systems for more than 20 years. And by using a Kinetico system, you’ll minimize waste and energy use, reduce the need for harsh cleaners and chemicals and help your water-using appliances work better and last longer.

    KENETICO IRON/MANGANESE REMOVAL WATER FILTERS NEVER BREAK DOWN

    WE NEED TO KNOW HOW MUCH IRON & MANGANESE IS IN YOUR WATER.


    KINETICO HAS AN AERATION SYSTEM WITH VENTURI INJECTOR FOR IRON & MANGANESE REMOVAL
    NO CHLORINE DOSING
    The Kinetico Aerator is one method for removal of iron, manganese and hydrogen sulphide. Air is introduced into the water stream, promoting oxidation. Oxidation converts soluble iron and manganese to insoluble compounds, which precipitate out and collect in the bottom of the tank and/or are removed by an appropriate filter downstream.
    Oxidises Iron*, Manganese Or Hydrogen Sulfide in Water
    Single Tank Aerator – No Need for Storage
    Inbuilt Air Filter to prevent contamination
    Ideal for oxidation pre-Macrolite® Filter
    19-30L/Min flow rate for oxidation


    Powerline PRO Filter
    Specifications
    Specification PF 1054 PRO – Iron PF 1054 PRO – Sulfur PF 1354 PRO – Iron PF 1354 PRO – Sulfur
    Valve Standard Standard Standard Standard
    Tank 10×54 10×54 13×54 13×54
    Lower Distributor Vortech Vortech Vortech Vortech
    Media Iron Blend Sulfur Blend Iron Blend Sulfur Blend
    Amount 2 Buckets – 1.42 cf 2 Buckets – 1.42 cf 3 Buckets – 2.13 cf 3 Buckets – 2.13 cf
    Gravel
    REMOVAL OF IRON & MNAGANESE
    pH 6.8 – 9 5 – 9 6.8 – 9 5 – 9
    Service Flow 5 gpm 4 gpm 7 gpm 6 gpm
    Peak Flow 8 gpm 8 gpm 10 gpm 10 gpm
    Maximum Iron 7 ppm
    Maximum H2S 0.5 ppm 6 ppm 0.5 ppm 6 ppm
    Maximum Manganese 0.5 ppm 0.2 ppm 1 ppm 0.2 ppm
    Backwash Time 12 min 12 min 12 min 12 min
    Backwash Flow 5 gpm 3.5 gpm 7 gpm 6 gpm
    Air Draw Time 45 min 45 min 45 min 45 min
    DF Rinse Time 5 min 5 min 5 min 5 min
    Air Activ. Timing 300 – 500 gallons 300 – 500 gallons 300 – 500 gallons 300 – 500 gallons
    Backwash Timing 3 Days Minimum 3 Days Minimum 3 Days Minimum 3 Days Minimum
    Warranty come back to this page by clicking on the + Google Drive on the top line

    FORMULA TO WORK OUT THE SIZE FOR TANK:
    Request-Quote-On